This machine has CNC function like the large gantry CNC cutting machine;
it can cut any complex plane figure, applying to oxygen, gas flame cutting and plasma cutting.
Like the semi-automatic cutting carriage, this machine is convenient and flexible, free to move, not occupying the fixed site.
This machine programming is simple.
It can manually program simple graphics, and automatically program arbitrary complex graphics through the complimentary programming software.
The software uses an interactive dialogue; graphics data is automatically converted, without manually writing code.
The AutoCAD parts drawing is stored directly as a DXF file, and arranged through the programming software, then directly generates required G code files by the appropriate programming parameters.
Transfer and storage of files is Convenient and flexible: support USB interface.
The user could output the required cutting file to the U disk, and then plug the U disk into the USB interface of cutting machine; so file transfer can be realized.
The operation is simple and convenient: This machine could manually cut like a semi-automatic carriage, and also automatically cut like a large CNC cutter.
With the 5.7-inch high-resolution dot matrix LCD display, full Chinese menu, Chinese character prompt, static and dynamic processing graphics display, it is easy and intuitive to learn.

TECHNICAL PARAMETER

Model	WPACNC
Input Voltage(V)	220V,50/60HZ
Arm max. length (mm)	180mm
Effective cutting width(mm)	150mm
Rail length(mm)	Customer’s requirement
Effective cutting length(mm)	Customer’s requirement
CNC torch (piece)	1-2
Flame cutting thickness (mm)	6-150
Flame cutting speed (mm/min)	50-750
Moving speed (mm/min)	12000
Flame cutting gas	Acetylene, Propane, LPG
Plasma cutting thickness (mm)	Due to plasma power source